Originally Posted by
badler
I am about to mount a “modern” lens on a 2D board. The used lens I have is currently in a metal 90mm board. Ideally I would drill a 2 1/2 inch hole in the 2D board and enlarge it with a file and sanding.
Do I need to recess the hole to get the shutter to seat the lens? Or will the locking flange work on the full thickness 2D board?
Would I be better served leaving the lens mounted and build an adapted board to accept the metal board?
What are those sliding clamps called that hold a board to the camera, and where could I source them?
Thanks in advance. This forum is very informative and incredibly generous in its sharing.
Brent
Bookmarks