Originally Posted by
Ginette
I retreived recently an old Kostiner 1983 catalog. Here the page for the washer.
I have this model, the water entry is also the outlet. I think they do a second version with a separate water outlet.
The screw was missing also on mine, I replace it with a nylon bolt with a 1/4" lengh of latex yellow tubing (small caliber), unless it was leaking. Also the washer had a small crack in the hole, I reglue it with a piece of plexiglas over to reinforce the thin wall.
Even if it is illustrated to do that in the catalog, I never remove the adapter or the hose from the adapter, I put a small hose with a quick connector and this is that part that I disconnect when I wish to drain the washer. I think that only by the small hole, it will take a day to drain.
I don't trust plexiglas washer outside sink (I saw too many acrylic display cases that walls open). So my 20x24 and 16x20 washers are in a big and deep stainless tub.
Bookmarks