Parts are here: ( https://github.com/srozum/film_camera_tester )
It is a shutter tester (focal plane and leaf) and calibrated light source for testing meters.
Parts are here: ( https://github.com/srozum/film_camera_tester )
It is a shutter tester (focal plane and leaf) and calibrated light source for testing meters.
Hi all 3-D printing LFers out there - just posted version 1.0 of a LF rotating panorama (Cirkut) camera I'm working on
https://www.largeformatphotography.i...-graflex-build
Even monkeys fall from trees -- Japanese proverb
Lasse Thomasson | Instagram
I was tempted to 3D print a Packard shutter based on a patent drawing from 1895. It was a long process until the thing worked. Because of the friction, I added two springs to the shutter - also using 3D printing. Now it works relatively well. The special thing about this project is that I can print the shutter in different sizes, adapted to the respective lens size.
Construction in Blender:
First attempt:
https://www.flickr.com/photos/145497...7720316113882/
mounted on a camera
https://www.flickr.com/photos/145497...7720316113882/
Nice!
Even monkeys fall from trees -- Japanese proverb
Bookmarks