Just ordered
MORE ZEBRA PRODUCTS
Go to Etsy as that is the only way to buy
Just ordered
MORE ZEBRA PRODUCTS
Go to Etsy as that is the only way to buy
Tin Can
I know this is THE 'wet plate' thread
It gets little traffic these days
Perhaps any plate any size?
as many historical PLATES were made small for soldiers to carry
I am shooting Dry Plate 4X5 5X7 NOW
I want to shoot 2X3 CDV cards
and use Mamiya or Linhof 2X3
in their plate holders
Tin Can
Steven
From what my European cohort tell me, the FOMA liquid emulsion is very inexpensive where you are, here in the states it's 2x the cost of the 8oz liquid light when it's not on clearance, from what I've been told in Denmark it is/was less than 40euros for the whole tub ( maybe covid changed that?). Have you used it? The 1Kg size comes with hardener, which you can put in your gelatin sub layer, and your final wash if you coat them on your own. if you coat some varieties of Japanese Papers with it, after they are waxed the paper is clear like glass, and put infront of something black you get the same visual entertainment as you would an ambrotype. I've been using some that is about 10 years old and it still seems OK... ( the gelatin hasn't broken down yet ). ( if you coat glass with it you will probably have to water it down to make it a little more runny, I've never used photo Flo with it but some people who coat glass put a little bit in their melted emulsion and swear by it ).
sorry to hear that,
he and his partners sold oodles of those holders I don't think anyone else had that issue.
did you measure the interior of the holder and your plates? were they modern plates or vintage?
I've got bagmags, magazine camera septi and DDS holders and they can
all present problems when loading them with plates, in my case it's typically user error ...
seeing these holders and plates I make are standard sizes and sometimes vintage plates are sold in different
non original storage receptacles ...
ive never bought modern plate holders or used vintage plates
but I know the spring on the old holders and septi are a PITA.
book style I made myself work the best ..
Let me be clear.
J Lane Plates work well. I have a lot of them.
However his KS I bought is unusable. His own glass plates are correctly spec
But are too long and too thick for the holder I got directly from Jason
I collect holders of all size and type
Tin Can
¯\_(ツ)_/¯
More from ZEBRA
4X5 Plate Holder
and
Dry Plate TinType
The holder is PERFECT!
Tin Can
I think we need to consolidate all emulsion on glass and Tin
To simplify search
of course we all must bow to MOD judgement
Oren specifically is patient with me as I fade from all screens
I am finding and making NOS 1/4 Plate
This driven by my NOS 1/4 Plate acquisition today!
Mods are very good to us all!
Tin Can
Bookmarks