I'm going to build a 5x7 enlarger but I also want to print 5x4, 120, and possibly even 35mm.
I have seen posts about using a LF camera in reverse as an enlarger (with a light source behind the neg).
Light bulb moment... Does this mean I can get any 'neg to lens' and 'neg to bed' dimensions required by simply putting the relevant enlarger lens on a camera, using an appropriate film size mask on the ground glass, and paper size outlines stuck to a wall?
That would be great - but maybe there is some other arcane magic at work with an enlarger?
Thanks,
Peter
Bookmarks