I'm new to LF and picked up a box of Aristra EDU Ultra 100iso 4x5 sheet film. After developing a few sheets I'm questioning which side the emulsion is on.
I believe I've loaded the film into the holder properly, notch in the top right, yet when going to print the the matte side of the film faces away from the paper and the shinny side towards the paper. My experience with 35mm and 120 tells me that the matte side should be facing the paper.
I sacrificed a sheet of film to discover that with the film loaded as previously described, the green side of the film faces the holder and the gray side faces out.
Can anyone confirm which side the emulsion is on? Thanks.