will fuji 100c, 100b and 3000b pack film fit the Polaroid 405 back for my Sinar F2?
will fuji 100c, 100b and 3000b pack film fit the Polaroid 405 back for my Sinar F2?
Unfortunately the 100b B&W stuff is an endangered species.
I sure wish I could get more.
Michael Cienfuegos
I've been using Polaroid 107 B & W iso 3000 with my polaroid automatic 100. The stuff is great, (exp in 96') but every print has come out exactly how it should. Every pack has produced a print and a vibrant negative (the chemicals aren't dried out at all). I've got around 20 packs of this stuff left - message me if interested.
Does anyone have specific instructions for "recovering" the negative from Fuji FP-100C45 ?
From the Google searches I find, is it just bleach and warm water on the non emulsion side?
Yes...tape it down on a piece of glass with the image facing the glass. Apply bleach with a brush (not too much though) and eventually it'll wash off.
I found that I could use toilet cleaner with bleach just as well. It is thicker, so you can simply slather it on and let it sit for a few minutes. Wash it off and touch up any spots.
The problem though is scanning these. My scanner goes crazy with the colors when I scan them so I haven't had a real usable scan myself! But I mostly shoot FP-3000B anyway.
Yes indeed. For colour instant film FP100C and specially C45 it works very well and the scan results are great. The colours of the scanned negs are a bit weird but very nice. Be careful the bleach doesnīt get on the emulsion-side, this will ruin your neg. But itīs a great fun.
George
There is a small snag with the FP100 c45 and that is it has been discontinued , which means there is no large format instant film on the market, Having just shot a entire campaign on this film I am starting to despair about the long term commitment Fuji has for large format photography in the UK
Bookmarks