The CPE has he plastic frame to hold all the bottles. It is attached to the main unit by a pin on the left and two more plastic pins in the middle. I know the two plastic pins can be removed. How about the pin on the left?
Also, if the metal pin on the left is missing, is it possible to replace it?
The metal pin on the left is molded into the housing. It cannot be removed.
If it is missing, you can use any small wood\self guiding screw, carefully screwing in from underneath the bottle rack (this is a bit tricky).
The other option is to have the same screw screwed in from inside the housing.
Good luck.
Posting Permissions
Reply With Quote
Bookmarks