Hi folks!!

I've just finished making my new DIY camera. I've used pieces from an old Sinar P and several opto-mechanical rails and focusing adapters to make it. The focusing knob is SOOOO SMOOTH!! It can make 1/100 mm movements. I've also used a hasselblad sliding adapter from Fotodiox with some mods in order to add an extra protection to the sensor. This has been the most difficult part, as the focusing screen has to be in the same plane as the sensor with the polaplus mod on it. The Fotodiox adapter can do horizontal shifting to make panoramics. I've also used a Fotodiox Canon adapter to make the sliding plate for the lens, to allow it to do vertical shiftings.

If anyone is interested on doing something similar, I will be glad to share my knowledge. I spend 3 weeks thinking how to do it, but finally the result is pretty acceptable.

Thanks a lot for all the information I gathered from different people in this forum.

Bye!