Power Macintosh G3 won't power up

[vinny]

I got this with a scanner as part of a package. It's not a big deal if I can't get it going but the scanner (screen dts 1030) requires an older mac and I have another one that does work but the new one would be much faster. Anyway, I press the on button and nothing lights up and no fans come on. The power cable is fine, checked that. Anything I should look for before I dump it?

[Filmnut]

Could be the power supply, but I'm not an expert. Have you tried doing a "google" search for ways to debug it?
Keith

[Frank Petronio]

It's a $40 part. Or just buy a couple of others as spares.

[domaz]

Could also be a bad switch- unlikely but not unheard of. PC power supplies can be tested with a wire jumper- google ATX power supply testing. I have no idea if Mac Power supplies are similar and can be tested that way.

[Greg Blank]

Every electronic device with a power supply works like this: power switch on and plugged into a powered socket & device lights up,....mac/pc its all the same....just depends on the design how to read the lighting up

[vinny]

Now I'm wondering if the power supply is something I can easily replace myself? I'd rather not sink a bunch of $$ into this to find out it's dead but the software is already installed (i do have the disks but have had issues installing Screen software in the past) and would be much faster to use than the old supermac i currently use.

[JohnnyV]

Change the motherboard battery! Seriously!

[Greg Blank]

Layman's terms....P -ram battery.....could work!

Change the motherboard battery! Seriously!

[Greg Blank]

Tell you this I have never gotten rid of any mac system that I owned, they all have attributes, that are of value. When you say Power supply its not really too clear. Every mac I have is a plug in unit, can you PM me a few photos of the PS, I have systems before your G3 and current ones well afterwards.

More than willing to help if I can.

Now I'm wondering if the power supply is something I can easily replace myself? I'd rather not sink a bunch of $$ into this to find out it's dead but the software is already installed (i do have the disks but have had issues installing Screen software in the past) and would be much faster to use than the old supermac i currently use.

[vinny]

I removed the battery and metered it, 3.59 volts so it's still good.