Hi,
does anyone can confirm to me that the Linhof marked Tele-Xenar270mm in a Linhof marked Compour shutter has a 1 size lens board mount?
Thanks
Giorgio
Hi,
does anyone can confirm to me that the Linhof marked Tele-Xenar270mm in a Linhof marked Compour shutter has a 1 size lens board mount?
Thanks
Giorgio
Going by the serial number, the lens pictured is a 270 Tele-Arton, not a Tele-Xenar, and is in a Compur 2 shutter which needs a 53mm hole. Later Tele-Artons were available in a size 1 shutter but I don't think the 270 Tele-Xenar was ever sold that way.
HI thanks,
my mistake I have uploaded the wrong pic...
This is the lens I've bought, the Tele-Xenar 270mm in linhof shutter.
Thanks for your help.
That one is also in a Compur 2.
Thanks Paul.
Giorgio
Just another question:
as there are diffeent Compur 2 size, what is the size hole for this lens? (same as Tele-Arton 53mm?)
It seems very difficoult to find a linhof board drilled for Compur 2 so i need to get a blank board?
Thanks
Yes, they are both in a Compur 2-5 which is a 53mm hole. The trouble is that there is also a Compur 2-6 which is wider so just saying Compur 2 can be confusing. Note that the actual threads on the shutter will pass through a 50mm hole, but the 53mm hole is the correct size to fit the lip on the back of the retaining ring.
Thanks again Paul, your help is much appreciated.
Giorgio
Bookmarks