90mm/6.8 angulon which to pick?

[fbf]

I am looking for a lightweight, hiking 90mm lens and the 90/6.8 angulon seems to fit my needs very well. I found two lenses and can't decide which one to buy
1st one is a 1968 90/6.8 angulon with factory converted copal shutter
2nd one is an early Linhof select 90/6.8 angulon on compur shutter

I have always heard good things about linhof selected lenses but 1st lens has a modern shutter which I suppose will last longer.

Assuming prices are the same. Which one would you pick?
Would appreciate any input.

Thanks

[Darin Boville]

If you have the serial number of the lenses can de dated which might be a big help in determining which is more desirable.

[fbf]

If you have the serial number of the lenses can de dated which might be a big help in determining which is more desirable.

1st one with copal 110xxxxx
2nd one linhof select compur 69xxxxx

Is newer always better? or is it certain serial# better than the other?

Thanks

[Frank Petronio]

A later serial number and Linhof select is going to be best. It's probably a toss up unless you buy both and shoot a test, and I suspect they will be close.

It's more risky with the older 2-3 million serial numbers but by the 6 million numbers I think Schneider was much more consistent.

The Linhof Compur is a better built, higher quality shutter than the Copal, they are both old shutters at this point, they both may require service by now. Copals are fine BTW.

[Darin Boville]

Just curious--how much is the seller asking for these? Both lenses come up fairly often so a fair "market price" is easy to determine.

--Darin

[archer]

If both lenses were the same quality, I would always pick the lens in the Compur shutter because while nice shutters, the Copal is not in the same class as the Compur.
Denise Libby

[Phil Hudson]

Is the Copal shutter a remount? This may change the cell spacing slightly and negate any advantage of the later lens cells. Sometimes original is best (but not always!).

[IanG]

A lot of the issues of early 90mm f6.8 Angulons is actually down to inconsistent cell spacings which are due to variations with the older style (rimset) Compur shutters. At some point this issue seems to have been ironed out.

It is rather hit & miss with these lenses my first a Linhof select version was poor at the edges & corners, a second I borrowed was little better, however I've now found a good one, 6,746,*** SN which matches Frank's comments.

Like others I prefer Compur shutters where possible, but if it's a genuine factory Copal conversion there shouldn't be an issue.

Ian

[fbf]

THanks for the advice guys. I think I am going to hold off for now. There are plenty of these lenses available so I probably will be looking for a late linhof selected in the future.

[maddoc2003jp]

I have a 4247xxx "LINHOF SYNCHRO COMPUR" 1:6.8/90 and just three hours ago one of the shutter blades broke off .... The lens was very good performing but I guess that I have a paper-weight now ...

"fbf" ... Is that you Chris ?