I use
THESE 4-per-page polypropylene sleeves from ADOX. They are rather strong (thicker and heavier than the PVC ones) and film does not have the tendency to fall out as the friction between the film and the sleeve material is rather large. I also use 120 film strip sleeves from Adox. In fact I have just taken delivery 100 pieces of each. They are well done and simple. On the very top you have one 1/2 inch wide sleeve row where you can slide in a narrow piece of paper for comments.
I also use the
ring-binders from Adox as they are perfect to keep the sleeve. They close like a box and are stable enough to stand on a side. I use 3 of these (35mm, 120 and 4x5).
One advantage of the Polypropylene is that it does "stick" to the film like the PVC so you get practically no Newton rings when viewing the slides on a light table.
So my solution is Adox (Adofile for these products)
Bookmarks