Jobo

**Kevin J. Kolosky** · 18-Apr-2002, 13:20

I am putting this question in the large format forum since so many here use Jobo equipment.

My question is this. Is there a way (absent sending the unit to the importer) t o adjust for "temperature drift" on Jobo CPP2 processors. I know I am being picky, but the temperature on mine varies between 3 - 4 degree s higher than I set it for and I would like it to be the recommended 1/2 degree if that would be possible.

Thanks.

Kevin

**William Marderness** · 18-Apr-2002, 13:30

You can do this yourself. You have to open the motor head and turn a vertically-mounted wheel on the panal. There are instructions on how to do this somewhere on Jobo's website.

**Kevin J. Kolosky** · 18-Apr-2002, 15:19

William

ARe you sure. I do not see any sort of vertically mounted wheel on the panel, nor do I see instructions for this on Jobo's website.

Kevin

**scott jones** · 18-Apr-2002, 18:13

I would recommend calling Jobo's service department. They are always fabulous about answering the most minute questions for me. (800) 664-0344 x160 and talk with Mark or Sam. . .

Scott