If all goes badly wrong then on the side is a slot for a winder to process by hand, as to loading the tray should be fixed to the unit with the white positive tab inserted into the slot,the most important thing is to make sure positive it is sitting in the frame,if not it will not pull through with the neg. When shooting the neg just ensure that the top of the envelope is over the tab so when you pull off the sleeve the neg stays in the slide, when putting the slide into the tray it should all fix snugly ,any movement will indicate the slide is not fitting, ,when you press the power button keep it pressed until the slide goes through , then wait until the time is up, and if I were you add a bit , resist the urge to pick it up too soon as you will get marks on the print.
Bookmarks