Does someone know the proportion used with Spotone inks for Ilford FB Multigrade IV dipped for 2-3 minutes in Selenium diluted at 1:20? Many thanks for your answers. Awsiya.
Does someone know the proportion used with Spotone inks for Ilford FB Multigrade IV dipped for 2-3 minutes in Selenium diluted at 1:20? Many thanks for your answers. Awsiya.
Hi Awsiya,
There really isn't a set formula, so I would suggest experimenting with some selenium toned work prints. Try #3 Natural Black mixed with various proportions (very slight, though) of #0 Olive, and experiment until you're happy. I tend to tone my Ilford FB Multigrade IV a bit more for a cooler tone, so I generally can get away with just the #3. This paper does have a greenish cast, which might be more evident with less toning, hence the olive.
I usually mix my inks and then let them dry on a piece of glass before working with them, then use a very slightly moistened brush.
The tedium!
Spotone has, or had, a spotting toner for selenium prints. It does not come with the three-bottle kit and has to be purchased seperately.
Regards,
Bookmarks