Rollie 4x5 IR Sheet Film

[tgtaylor]

Anyone familiar with his film? Specifically, are the sheets notched so that you can determine the emulsion side? Also, is this an ISO 400 or ISO 200 film? I ask because all the websites indicate that it is an ISO 400 film but on the box it sates: "...the correct processing time will be at ISO200."

Thanks,

Thomas

[monsta]

hiya, when i use this film i rate it at around 1-3 iso with a hoya R72 filter. the processing was in rodinal 1+50, 10 mins at 20ºC. cheers, john

[monsta]

the film has the notch too.

[tgtaylor]

Thanks John.

[Andrew O'Neill]

I used it at 400 with #25 filter. The last box I used was poorly notched. By the time I got to the middle of the box, the notches had disappeared.

[Nana Sousa Dias]

I used it at 400 with #25 filter. The last box I used was poorly notched. By the time I got to the middle of the box, the notches had disappeared.

I had the same problem with the last box. I will not buy it again, I'm gonna try the Efke 820C, it's cheaper...