4x5 Film Holder needed with Fuji Quik-Stick film?

[David Roy]

Do I still need 4x5 Film Holder if I use Fuji Quik-Stick film (e.i. Astia 100)?

[Todd Caudle]

Do you mean QuickLOAD? If so, no, you need the Fuji Quickload holder or equivalent.

[David Roy]

Todd: Thanks, your right, I did mean quickload.

[Kaatharine Thayer]

I have a similar question; I thought I'd read somewhere that the Polaroid 545 film backs will work for Fuji Quickload. Is this true?

[David Roy]

Katharine: I found this link should answer your question http://www.photo.net/bboard/q-and-a-fetch-msg?msg_id=000ek3

[Pete Andrews]

Quik-Stick film sounds quite a good idea. No filmholder needed. Just slap it on the inside of the ground-glass screen! And no film bulging problems either.;^0

[Kaatharine Thayer]

Thanks for link. I thought I had read everything on the site but evidently somehow missed the whole series of threads on film holders.

[David Roy]

Katherine: Yes, I've just recently found the categories at the lower section of the page too.