I saw the question and answers for this similar subject of april 10. I have this lense myself, but I need some advise on how to detach the front of the lense. Are there any screws to loosen
I saw the question and answers for this similar subject of april 10. I have this lense myself, but I need some advise on how to detach the front of the lense. Are there any screws to loosen
under normal circumstances, not, however some lenses might be mounted with retaining rings or screws .
The lens groups unscrew from the shutter like a bottletop from a bottle. Turn counterclockwise to loosen.
They are often stuck in place and require a fair amount of force to loosen if they are in that condition.
Steve Grimes. www.skgrimes.com
My 300/500 Convertible Symmar is converted by unscrewing the front element. I would suggest that you do this with the lensboard/lens off the camera and stationed on a padded surface. I don't convert my lens often but I recall that it seems to take forever to unscrew and then, all of a sudden, the front element comes off! The front element on the 300/500 is a big chunck of glass and I recall almost dropping it while attempting an on-camera conversion. Hope this helps.
.............................
Bookmarks