Results 1 to 2 of 2

Thread: Wollensak Verito questions

  1. #1

    Join Date
    May 1998
    Posts
    18

    Wollensak Verito questions

    I just got a Verito "Defused Focus" lens. I very much want to use this lens for some Retro type portrait work. But this lens is very used. In fact a former u ser removed (!) the blades from the diaphram. Ah well. I notice there is a slo t in the lens barrel and I think I recall reading that this was used to insert s creens for different defusion effects. I also recall reading that the Verito le ns defusion effect was lessened by stopping down the lens.

    So with all this is mind.... Would I be better off fashioning some "Waterhouse" type stops to be put in the slot, or.. is it a better idea to control the exposu re by using the slot for negative density filters? If I used ND filters, then I would have the lens at full diameter, and (I suppose) have full effect of the d efusion.

    Or am I way off base on this? Are there any old salt photogs out there who can lend a hand? The focal length of this lens is 8.75 inches, if that makes a diff erence.

    thanks for your help.

    chuck k

  2. #2

    Join Date
    Dec 1999
    Posts
    68

    Wollensak Verito questions

    The Verito image gets sharper as it is stopped down and after F-11 it's pretty sharp. I believe that the wide open image at f-4 may be too soft for many photographers' tastes (it's pretty mushy). My personal perference is around f-6. I would cut the Waterhouse stops out of thin black material like construction paper and place them inside by unscrewing the front element and putting them in roughly the position of the missing iris diaphram--this is quicker and easier than trying to fabricate them to fit the slot (I would also tape over the slot to keep unwanted light out of the barrel). For the opening you can use the formula: Diameter = focal length over f-stop. With the Verito, it doesn't have to be high precision or perfect. When you find the stop that makes the image you like, leave it in place and adjust the lighting for that stop. Neutral density filters (if necessary at all) can be put in front or behind the lens. Lighting with the Verito is another craft all by itself--I like umbrellas or diffused north skylight. A deep lens shade (also from black craft paper) is a good idea. Good luck.......

Similar Threads

  1. verito
    By robert_4927 in forum Lenses & Lens Accessories
    Replies: 16
    Last Post: 25-Jan-2005, 02:57
  2. Mounting flange for 14 1/2" Verito
    By Jay DeFehr in forum Lenses & Lens Accessories
    Replies: 4
    Last Post: 6-Sep-2004, 18:36
  3. Wollensak Verito, Veritar
    By Jeff Buckels in forum Lenses & Lens Accessories
    Replies: 4
    Last Post: 8-Jul-2001, 19:59
  4. Wollensak 7 inch Diffused Focus f4 Verito
    By Dean Lastoria in forum Lenses & Lens Accessories
    Replies: 4
    Last Post: 17-Jul-2000, 21:43
  5. Omega D3, Wollensak Raptar - Questions?
    By tim atherton in forum Darkroom: Equipment
    Replies: 1
    Last Post: 5-Oct-1998, 22:47

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •