Sinar and sand

[Jan_6568]

Hello,
I am just back from vaccation in Norther California and Oregon Coast. It was really great except ... It was kind of windy when I was photographing in Shore Acres SP and some sand got into front standard of my Sinar F2. It is not very bad in a way that all the movements work well and smooth but the sound of sand in the camera's mechnisms makes me sick.
I would like to have the mechanisms cleaned. I have already tried canned air to remove sand. It helped but some of the sand is still there. Anyone has and idea how to clean it? I think the worst are the locks that hold the lens board and the bellows. Would you dare to disassemble the mechanism to get access to the internal parts?
Thanks a lot for any suggestions,

Jan

[Ron Marshall]

I looked at my F1 and I think if you are able to dissasemble it and are gentle and carful you will be able to get it together again. Worst case, you pack up the parts and ship to S.K. Grimes for reassembly.

[Jim Noel]

Sinar cameras are too precision to take into such conditions because the sans, and salt will grind away at the surfaces. When the conditions get that bad my Norma is packed away and the cheapy wooden field camera takes over.

I would have had that bugger apart the night it happened, blown out everything, wiped all surface down with a damp cloth (for the salt) then a dry one, then re-assembled.

The entire camera needs attention or problems may surface in the future. Think especially of the rail and all parts which come n contact with it.

No, I am not a camera repairman, I just take extremely good care of my prime equipment, or my good old Norma whould not still be pristine.

[Ken Lee]

I would rather take my Sinar to the beach than my wooden cameras.

Sinars are made of strong components which can be broken down, cleaned, and restored - much like (I presume) a good military rifle should be.

[Photomax]

I am with Ken on this one. I have a Sinar F1 and they come apart pretty easily. Good light, compressed air and some time should do the trick...

[Ed Richards]

Just pay attention to how the parts go together, maybe even a few digital snaps. I stripped mine down and spend some time getting the locks on the rise for the standards back together.

[Jan_6568]

Thanks a lot. I will try to take it apart - keep your fingers crossed, please. I am pretty good in taking things apart but not as good in re-assembling them

Jan

[Brian Ellis]

My sympathies. Some years back I dropped my Pentax spot meter in the sand while photographing on a beach. I've never been able to get the last few grains out. The meter functions fine but I get the same grinding you mention every time I turn the dial and it's extremely irritating.

[Clueless Winddancing]

Do it right and you would have a story with pictures on "How to__..."

[lenser]

If you are as lucky as I am, you've got a good friend who is a brilliant machinist and who likes to do favors.

If you don't feel confident in cleaning this yourself, and can find a good machinist, (and I emphasize good) he should have little trouble in taking this down, thoroughly cleaning it, re-lubing whatever it may need with the appropriate grease, oil, or dry lubricant it needs and getting it back together with ease.

I'm definitely not talking about lenses, meters and the like, but the mechanics of a large format body are reasonably straight forward for someone who makes their living interpreting and then machining far more difficult projects.