I have a Linhof Tech IV I recently inherited with 90mm lens on recessed board. With the longer lens, the shutter is on a flat board and I can plug a sync cord right in. With the 90mm, the shutter is on a recessed board and the tight fit d oes not allow me to plug in the flash.

I have cut down the plug itself with a jeweler's saw (on the Paramount sync cord, not the flash contact on the lens) to decrease its clearance and carved as much of the rubber on top of the paramou nt sync plug as I could but it still will not mount.

99% of the time I use t his lens with no flash so it hasn't come up in the three months I have owned it and the previous owner is no longer living so I can't ask him. Anyone else face d this dilemna? There is an adapter thing I can screw my cable release into to fire the shutter --- is there something else I can attach to allow me to plug in the sync? And finally, why the hell didn't Linhof make the flash plug on this lens point out at a 45 degree angle? I've seen that on some of their other shut ters.