Results 1 to 6 of 6

Thread: Recessed Graphic lenseboard

  1. #1

    Recessed Graphic lenseboard

    Is a recessed Graphic (93x94mm) lenseboard available? (It would make a 65mm lense easier to use on my old Toyo metal field).

    I've seen this on ebay, but I think it is Toyo/Linhof style - is that right?

  2. #2

    Join Date
    Jun 2004
    Location
    Montana
    Posts
    627

    Re: Recessed Graphic lenseboard

    That looks like the big square board that the older 45 series Toyos use, they will not fit your application.

  3. #3
    Moderator Ralph Barker's Avatar
    Join Date
    Sep 1998
    Location
    Rio Rancho, NM
    Posts
    5,036

    Re: Recessed Graphic lenseboard

    There are recessed 110mm boards available for Toyo Field cams, but you'll likely need to use a pen or pencil to make adjustments (and a small flashlight to see what you're doing).

  4. #4

    Join Date
    Aug 2000
    Location
    California
    Posts
    3,908

    Re: Recessed Graphic lenseboard

    If you are speaking of the Graphic View, yes, there are recessed boards available. In fact, I think there were two different depths available for this camera. Try someplace like Midwest (speak to Jim) or KEH. They may have one laying around.

  5. #5

    Join Date
    Sep 2003
    Location
    South of Rochester, NY
    Posts
    286

    Re: Recessed Graphic lenseboard

    93x94mm would be a standard "Pacemaker" type lens board. The View's used flat 4 inch boards...

    There is a recessed board in the Pacemaker style. It is very rare. I have a feeling it was made by Toyo right after they started producing their Super camera after buying everything from Graflex. There never was a mention of a Pacemaker or Super recessed lens board in Graflex catalogs... If you keep a close eye out, you might be able to find one. It only took me three years...

    If you're handy, you can make one from a standard board and a cut-out from a steel or aluminum muffin pan plus a few screws or rivets...

    And yes, I have one here. And no, I'm not getting rid of it...

  6. #6

    Join Date
    Feb 2007
    Location
    SW VA
    Posts
    8

    Re: Recessed Graphic lenseboard

    Quote Originally Posted by David Hedley View Post
    Is a recessed Graphic (93x94mm) lenseboard available? (It would make a 65mm lense easier to use on my old Toyo metal field).

    I've seen this on ebay, but I think it is Toyo/Linhof style - is that right?
    At Capitol Photo we had recessed lense boards for our Crown Graphics to use with the 65mm Super Angulon, but I can't recall whether they were from the manufacturer or made for us by Strauss Photo Technical Service.

    Strauss is still in business in Washington D.C., you might contact them.

    SPTS
    # Phone : 202-529-3200

    # Fax : 202-526-6465

Similar Threads

  1. Replacing bellows on Super Graphic
    By al olson in forum Cameras & Camera Accessories
    Replies: 4
    Last Post: 5-Feb-2007, 14:35
  2. Making a recessed lensboard and figuring out angles,vignetting risk etc
    By Nick_3536 in forum Cameras & Camera Accessories
    Replies: 6
    Last Post: 24-Aug-2004, 11:08
  3. adapt FocusSpot to Super Graphic?
    By David Haardt in forum Gear
    Replies: 2
    Last Post: 14-Nov-2001, 14:56
  4. Super Graphic lensboards the same as Speed Graphic?
    By Robert Meier in forum Cameras & Camera Accessories
    Replies: 1
    Last Post: 26-May-2000, 20:35
  5. 65mm / recessed lenseboard
    By fw in forum Lenses & Lens Accessories
    Replies: 2
    Last Post: 26-Oct-1999, 05:56

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •