Originally Posted by
Bob Salomon - HP Marketing
First lensboards are not drilled they are milled. This ensures accurate placement and eliminates any chaance of the board warping.
The #3 Linhof Technika 45 lensboard is Cat. # 001059. The hole is 65.09mm in diameter and the top of the hole is 22.12 mm from the top of the board.
The longest lens that Linhof lists as working on the Technika IV, V, Master or 2000 is the 400mm 5.6 Apo Tele Xenar. You may need the Wista extension lensboard set to use the 450mm. Especially if you want to focus in a ways.
Bookmarks