Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Broken 4x5 protective cover glass

  1. #1

    Broken 4x5 protective cover glass

    Click image for larger version. 

Name:	protective clear glass.jpg 
Views:	90 
Size:	59.4 KB 
ID:	243287

    Hi,
    Recently, the protective cover glass of the Maxwell HI-LUX focus screen broke while shipping the Chamonix camera to China.
    I sent an email to Mr. Bill Maxwell, but did not receive a reply.

    First, I bought protective clear sheet from Chamonix and installed it instead.
    But this is plastic, not glass.
    Mr Hugo said Chamonix now uses plastic clear sheet instead of glass sheet to cover the Fresnel lens.

    Anyway, I want to get a clear sheet made of glass.
    If there is a seller, please let me know.
    Thanks.
    Chamonix 45N-2, Chamonix 45H-1

  2. #2
    Small town, South Carolina, US
    Join Date
    Sep 2006
    Location
    Here
    Posts
    499

    Re: Broken 4x5 protective cover glass

    I suggest that you call Bill Maxwell if at all possible.

  3. #3

    Join Date
    Oct 2016
    Location
    Belgium
    Posts
    121

    Re: Broken 4x5 protective cover glass

    On the picture you posted, I can see it is only a corner that broke off.

    There is a special glue for restoring glass, which is even used in archaeological musea for restorations, that is extremely fine and when dry is hardly visible, years ago I used that, I think it came from AkzoNobel, for repairing the ground glass of my 13x18cm Sinar Norma, which worked perfectly...

  4. #4

    Join Date
    Sep 2012
    Location
    Sunshine State
    Posts
    1,102

    Re: Broken 4x5 protective cover glass

    This protective glass is not a special glass, just a piece of glass to protect the fresnel glass. You can go to any window glass stores near you and they will find a piece of matched glass for you, cut the size you want. I have done that before when a seller did not ship the protective glass with the camera to me. It only costs about $6.

  5. #5
    Alan Klein's Avatar
    Join Date
    Jun 2015
    Location
    New Jersey was NYC
    Posts
    2,588

    Re: Broken 4x5 protective cover glass

    Quote Originally Posted by younghoon Kil View Post
    Click image for larger version. 

Name:	protective clear glass.jpg 
Views:	90 
Size:	59.4 KB 
ID:	243287

    Hi,
    Recently, the protective cover glass of the Maxwell HI-LUX focus screen broke while shipping the Chamonix camera to China.
    I sent an email to Mr. Bill Maxwell, but did not receive a reply.

    First, I bought protective clear sheet from Chamonix and installed it instead.
    But this is plastic, not glass.
    Mr Hugo said Chamonix now uses plastic clear sheet instead of glass sheet to cover the Fresnel lens.

    Anyway, I want to get a clear sheet made of glass.
    If there is a seller, please let me know.
    Thanks.
    Why do you object to plastic? Glass could only break again.

  6. #6
    Alan Klein's Avatar
    Join Date
    Jun 2015
    Location
    New Jersey was NYC
    Posts
    2,588

    Re: Broken 4x5 protective cover glass

    I'm just looking at your photo again. Is that the protective cover that broke or the ground glass?

  7. #7

    Re: Broken 4x5 protective cover glass

    Thanks for all the replies.

    1. I emailed Bill Maxwell again. my English speaking is very bad.
    2. The broken protective clear sheet was discarded in China.
    3. Following your advice, I am looking for 1~1.5mm thick clear glass here in South Korea.
    4. For some reasons I need glass instead of plastic.
    5. "Ground glass + fresnel lens" is not broken, protective cover is broken.
    Chamonix 45N-2, Chamonix 45H-1

  8. #8

    Join Date
    May 1999
    Posts
    553

    Re: Broken 4x5 protective cover glass

    If it's just a piece of glass, buy a cheap clip photo frame to have the material and cut it to size.
    A common size is 6x4" but if the cut is tight go for a larger one (10x8"). This glass is thin and very easy to cut; or just give it to a glass store and ask for a cut.
    Smooth the edges with sandpaper if needed.

  9. #9

    Join Date
    Apr 2009
    Location
    Seattle area, WA
    Posts
    1,333

    Re: Broken 4x5 protective cover glass

    Quote Originally Posted by Alan Klein View Post
    Why do you object to plastic? Glass could only break again.
    I bought an 8x10 camera that had plastic over the ground glass to protect it. I started having a had time focusing with the camera, so I resolved to clean the ground glass and noticed the plastic had developed some sort of fade/fogging that was uncleanable. I threw away the plastic and resolved to just be careful with the ground glass. (Adding another piece of glass is fine, but in an 8x10 that's much more extra weight)

  10. #10

    Re: Broken 4x5 protective cover glass

    Quote Originally Posted by jose angel View Post
    If it's just a piece of glass, buy a cheap clip photo frame to have the material and cut it to size.
    A common size is 6x4" but if the cut is tight go for a larger one (10x8"). This glass is thin and very easy to cut; or just give it to a glass store and ask for a cut.
    Smooth the edges with sandpaper if needed.
    Thanks for your advice!
    Chamonix 45N-2, Chamonix 45H-1

Similar Threads

  1. Replies: 14
    Last Post: 4-Mar-2022, 19:33
  2. Ebony 4x5 Protective Glass
    By bulrich in forum Cameras & Camera Accessories
    Replies: 3
    Last Post: 20-Dec-2011, 14:44
  3. Need help about ground glass and protective glass (cambo 4x5)
    By shOo in forum Cameras & Camera Accessories
    Replies: 6
    Last Post: 31-Jan-2011, 10:01
  4. 8X10 Protective Glass Cover Question...
    By jim kitchen in forum Cameras & Camera Accessories
    Replies: 8
    Last Post: 2-Jul-2006, 19:05

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •