Film Holder 8x10" for Epson v850

[Fermat]

Hi all
I have an Epson V850pro and would like to scan my black and white 8x10" film.

Is there any specific film Holder ti use?
Which One?

Thanks

[Lachlan 717]

Isn’t it the flimsy, thin film surround guide?

Don’t think they did a film holder as such.

[Lachlan 717]

https://www.largeformatphotography.i.../t-161519.html

And,

http://www.scandig.com/filmscanner-a...v700-v750.html

The second shows the guide. The Epson V850 webpage indicates this is possible.

[Oren Grad]

What Lachlan said. There isn't any holder for 8x10. The film goes directly on the glass within the perimeter defined by the film area guide.

[paulbarden]

8x10 is scanned directly on the glass.

[bmikiten]

8x10 is scanned directly on the glass.

And it is at the lower resolution. The 850, while a good scanner, isn't the best for 8x10 (from direct experience). It really depends on your final use.

[paulbarden]

And it is at the lower resolution. The 850, while a good scanner, isn't the best for 8x10 (from direct experience). It really depends on your final use.

And I don't expect many (any?) of us intends on making 8x10 FOOT prints from such a scan.

[Fermat]

Thanks all for your inputs.

[Fermat]

And I don't expect many (any?) of us intends on making 8x10 FOOT prints from such a scan.

Which scanner can provide a "good" quality?
Thanks

[rawitz]

And it is at the lower resolution. The 850, while a good scanner, isn't the best for 8x10 (from direct experience). It really depends on your final use.

I scan my 8x10 colornegs with the epson wetmounting holder in two parts and stich after. So I have the high-resolution scan and ICE dust removel.
For BW there is no ICE. The resolution advantage of filmholder to groundglas is about 2400 dpi to 2000 dpi net. For this resolution step I personally would not step up to the highres-scan. 2000 dpi net for 8x10 is a lot (!) of information. The drumscan services here in germany dont offer 8x10 scans with more than 2000 dpi.
What modern (USB and 64bit software) scanner better than Epson 700/800 can you recommend for 8x10?
regards
Rainer