Which lenses mount in Compur 2/V Shutter?

[Duyfam]

Hello everyone, I have the lens of the eidoscope 150 4.5 lens, as far as I know it can be mounted on the shutter Compur 2/v according to the Hermagis catalog. Can you tell me which lenses are popular and also mount on shutter compur 2/v ?
Thank you!

[Oslolens]

The early Symmar 240mm f5.6 and the tele-arton f5.5 240mm are the same, but maybe not your size. Quite a few available on ebay.

What do you have? From a post by Ole Tjugen

Compur 2-X Tube 5/I
Compur 2-X Tube 5/II
Compur 2-X Tube 6/II

Dimensions are listed as:

A: Cell thread (all are the same front and rear), all are 40 t.p.i.
B: Flange thread
C: Largest aperture diameter
D: Body diameter
E: Length
F: Mount depth (flange to rear end of shutter).

Data - all dimensions in mm



2-5/I : A: 45.8 x 40 t.p.i. B: 50 x 29 1/13 t.p.i. C: 35 D: 80.5 E: 35 F: 14.6

2-5/II: A: 45.8 x 40 t.p.i. B: 50 x 29 1/13 t.p.i. C: 35 D: 80.5 E: 25 F: 8.3

2-6/II: A: 49.65 x 40 t.p.i. B: 55.8 x 29 1/13 t.p.i. C: 35 D: 80.5 E: 30.8 F: 12.2



Sent fra min SM-G975F via Tapatalk

[Len Middleton]

Schneider 355mm f9 Repro-Claron, as well...

[Luis-F-S]

Schneider 12 & 14" Artars and 12" G-Claron-Dagor design go in a Compur 2. L

[lassethomas]

The Schneider Xenotar 150/2,8 as well.
But perhaps not the lens you buy for the shutter.

[Dan Fromm]

Interesting idea. Berthiot took over Hermagis in 1934. According to a Berthiot catalog, the 150/4.5 Eidoscope covers 6 1/2 x 9, a metric plate/sheet film format. Not really a large format lens.

By analogy with 150/4.5 Tessar types, it might fit a modern Copal/Compur #1. However, Hermagis lists completely obsolete shutter sizes for what I think is the OP's lens. Look here: https://www.largeformatcameras.net/p...94/category/62. Note, and rue, that two are possible.