No worries.Originally Posted by mpirie
No worries.
One PDF of 450CLS head parts list shows both UV and heat absorbing glass in the light path. Maybe a slightly different version than yours. Did you find two 'clear' glasses? Some fog on either one of those might be OK if they are before the mixing box (due to the fact that appropriate replacement glass may be difficult to source).The clear one has a fog around center I can't clean off.
Only one clear piece of glass then the colored filters. The piece I have was directly under the lamp, I didn't loom uon the oppisite side under the colored filters to see if there were other pieces of glass. All I remember is the Taunobox and light chamber.One PDF of 450CLS head parts list shows both UV and heat absorbing glass in the light path. Maybe a slightly different version than yours. Did you find two 'clear' glasses? Some fog on either one of those might be OK if they are before the mixing box (due to the fact that appropriate replacement glass may be difficult to source).
Do you know where I can get a copy of the parts list for the cls450? I am gonna buy a copy though if cannot find one.
If the two uv filters are t he opaque ones they are good. One is at bottom of color head, the o t her is on top of taunobox directly below the other one. Above that, I don't see any other ones.
Yes, i think that is correct about the other filters.
I can e-mail the pdf.
Got the files. Thanks!
Here is shot of the uv filter ahead of the heat absorbing glass. It's in good shape.
Posting Permissions
Reply With Quote
Bookmarks