Hi all,

I need some clarifications about how to set-up an Omega D2 enlarger to work with 4x5" sheets.

I recently bought an Omega D2 with a standard lamphouse. The enlarger came with a 6x6cm and full-frame negative carriers. The condenser appears to be a 4406 (4 11/16" double condenser). The good folks at http://www.khbphotografix.com list that as a condenser for 75-105mm lenses. If I want to use the enlarger for 4x5" I'll have to use the 4403 condenser (6 1/2") which appears to be for 135-150mm lenses.

I could not find that 4403 condenser anywhere in my area but here's the thing: I can get a variable condenser lamphouse from someone close-by. My question is, could I use my existing 4 11/16" double condenser and attach the lamphouse with the third condenser lens? Or it's requiring a different condenser all-together?

I'm coming from a B22 enlarger and things were simple with that; one condenser pair and an extra lens optional, depending on what king of film you're doing, 6x6 or 35mm.

Also since we're here, does the regular (flat) lens board work for a 135mm lens, or I need to get one of those raised/recessed lens-boards?

Thank you all.

Regards,
Radu