Hi,
So I have a 210mm f9 g claron, I bought it years ago for 10x8 macro photography, which it was very good for.
I plan on using it outside to see how it performs as a wide lens, I understand that it may have limitations when movements are used, so if I wanted to get a 270mm g claron to use instead of the 210mm would I be able to just swap out the front and rear elements, using the shutter that the 210mm is currently in?
The shutter was re-marked by the previous owner so that the aperture was appropriate for the 210mm, if I swapped for a 270mm would it need to be recalibrated again?
Thanks
Bookmarks