Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Need help with wet plate lens

  1. #1

    Need help with wet plate lens

    Hello I am new to the forum and I purchased a Dallmeyer 15x12 Lens today at my local flea market, the glass appears to be clear, I do not have much information about it. I wanted to put it on my wet plate Camera. My camera is capable of 8 x 10. I am new to this, does anyone have any information about it? I know it uses water house stops, however I do not know if I can purchase them? Also, a lens cap? And possibly a screw on sun shield may be missing. Can I clean up the lens so it is shiny brass again? It says it was made in 1868. any Information would be helpful
    Last edited by Michael Raymond; 2-Jul-2017 at 15:31.

  2. #2
    Mark Sawyer's Avatar
    Join Date
    Jul 2004
    Location
    Stuck inside of Tucson with the Neverland Blues again...
    Posts
    6,269

    Re: Need help with wet plate lens

    Welcome to the forum! Most likely what you have is a Dallmeyer Rapid Rectilinear, a design introduced by Dallmeyer in 1866. You can confirm this if it has any sign of cement separation around the edges of the rear element, (the rear element in a RR is a cemented doublet). It's a very nice English lens, though perhaps slightly dark for wet plate portraiture at f/6 or f/8. Or there's a more remote chance that it's a 5A or 5D Petzval.

    Here's a link to an 1896 Dallmeyer catalog that lists their lenses:
    http://www.thedallmeyerarchive.com/R...0Catalogue.pdf

    With the serial number, you might find more detailed information about your lens here:

    http://www.thedallmeyerarchive.com/index2.html
    "I love my Verito lens, but I always have to sharpen everything in Photoshop..."

  3. #3

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    6,257

    Re: Need help with wet plate lens

    Another possibility is the Triple Achromat which was also engraved with the size it covered. 15x12" was a quite common format and these do appear quite often for both RRs and TAs.

  4. #4

    Re: Need help with wet plate lens

    Hello, thank you for the reply ! it is engraved Dallmeyer rapid rectilinear 1868

    Is this not a wet plate lens? I only paid about $100 for it I figured that was a good deal. Along with it I picked up a camera, Ill post pictures. I wanted to see if anybody knew exactly what it was, it has double Bellows and is very large. Please see my photo bucket link to check out the lens and camera.

    Also, Do I need Waterhouse stops to use the lens? Any idea where to find a " sun shield" for the lens or a lens cap? can I polish the lens?

    Sorry for all the questions, Im trying to get some info so I can re-finish the camera and get shooting.
    Last edited by Michael Raymond; 3-Jul-2017 at 04:59.

  5. #5
    Mark Sawyer's Avatar
    Join Date
    Jul 2004
    Location
    Stuck inside of Tucson with the Neverland Blues again...
    Posts
    6,269

    Re: Need help with wet plate lens

    If you click on "reply (rather than just use the "quick reply that's pre-loaded) and then click on "go advanced", there's a "manage attachments" button that allows you to upload images.

    It sounds as though you got a very good deal. The lens is appropriate for wet plate, and came from that era. You'll only need Waterhouse stops if you intend to use the lens stopped down, which most wet plate users don't.
    "I love my Verito lens, but I always have to sharpen everything in Photoshop..."

  6. #6

    Re: Need help with wet plate lens

    Thank you

    I posted a link in the post above to photo bucket for the lens and camera. Thanks for the information. Its apprecieated.

  7. #7

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    6,257

    Re: Need help with wet plate lens

    Your photobucket link is almost impossible for me to use (Ipad) due to long and lost loads! Close -up images posted here would help. Although it looks like a black painted Ansco/Century style studio camera, it has probably had use in the printing/reproduction industry. The RR is a typical lens used there in the era before lenses were designed specifically for this purpose. The lens is very good for general photographic use, but would be considered slow by most wet platers who are interested in portraits - due to lengthy exposure times.

  8. #8

    Re: Need help with wet plate lens

    Click image for larger version. 

Name:	IMG_0494.jpg 
Views:	29 
Size:	63.3 KB 
ID:	166742

    Click image for larger version. 

Name:	IMG_0495.jpg 
Views:	33 
Size:	36.4 KB 
ID:	166743

    Click image for larger version. 

Name:	IMG_0497.jpg 
Views:	31 
Size:	115.9 KB 
ID:	166744

    Click image for larger version. 

Name:	IMG_0496.jpg 
Views:	29 
Size:	114.8 KB 
ID:	166745

  9. #9

    Re: Need help with wet plate lens


  10. #10

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    6,257

    Re: Need help with wet plate lens

    The date engraving is very, very unusual. Is there no serial number? The only other date I can remember on UK lenses was the day of Queen Victoria's Golden Jubilee (Ross lens?).

    The lack of rear movements suggests a process camera, but basically a simplified version of Studio designs like Anthony, who were active before Century Cameras came along in 1899/1900.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •