Havs,
I am looking for a replacement valve as well.
If you end up fabricating let me know if you would be will to make one for me and what the cost would be.
Thanks
Gary
Havs,
I am looking for a replacement valve as well.
If you end up fabricating let me know if you would be will to make one for me and what the cost would be.
Thanks
Gary
"People take different roads seeking fulfillment and happiness. Just because they're not on your road doesn't mean they've gotten lost." - H. Jackson Brown
I have the original model which was given to me by Mr. Kostiner when he came to San Diego for a conference. It has no valve, only an input and drain. It has no opening to input air into the system, but has worked well for many years.
I have recently acquired a Kostiner Archival Washer without a valve mechanism. I would be interested to know how others have solved this problem. I would love to hear from anyone who has successfully fabricated a replacement. Seems like a 3d printer might be able to do the job, but I think you'd need to have an original valve in order to replicate one.
My first inclination was to try using a rubber stopper with a hole driilled out to allow a tube to be inserted. However, after reading the cautionary tales of structural failures, it seems likely that the back pressure of the water's weight would pop the plug out as soon as it got full.
My second idea, born of both laziness and expedience, would be to leave the washer drain open and fill it from the top and let it drain from the bottom. I realize that this isn't optimum, but I'm wondering if anyone else has tried this method and what the results might have been.
Buy a Ziss Air valve for $1.59 - https://www.aquariumcoop.com/product...84ca9c83&_ss=r (or something similar) and cut the threaded shank down the middle about 3/4 of the way as seen the poor snapshot below. You will need hose clamps and possibly PVC adapters to fit the tubes from your water supply to your washer. These items are easily had at any hardware store.
N. Riley
http://normanrileyphotography.com
Thanks,
Kirk
at age 73:
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep"
Yeah, it helps to dig out small prints that have drifted to the bottom of the tank. The guy who sold me mine didn't know what it was for, either.
They serve to agitate the print, thereby facilitating removal of thiosulfate residues.
N. Riley
http://normanrileyphotography.com
Bookmarks