Is it possible to magnetize a shutter?

[scheinfluger_77]

I have an f8/90 Super Angulon that i want to use on my 4x5 Crown as well as experimenting on my 2D 5x7. It seems that the easiest thing to do is leave the lens on the Crown G. metal lensboard, then make a recessed lensboard for the 2D with magnets in the back to easily attach and detach the metal-mounted S.A.

After further thought this seems like a recipe for disaster. Has anyone had experience with inadvertently magnetizing a shutter? Do you think this problem could be averted by making a wood lensboard for the CG and then using the magnets in the adapted mount for the 5x7?

[Bob Salomon]

The disaster would be the lens falling off due to normal shocks and bumps in use. Why not get or make an adapter board? That is not all that difficult to do and is far more secure. And parralism between the lens and the film would be much better.

[Old-N-Feeble]

I agree with Bob. Buy the front standard from a Crown or Speed Graphic or a junk body and make an adapter board.

[Tin Can]

Just thinking out loud, again....

The new affordable neodymium magnets are small thin, precision made and so strong they can be very hard to remove. That's all good.

They may magnetize the whole shutter, but that may be no big deal, if the whole shutter is the same polarity, nothing, like shutter leaves would be attracted to each other. No sticking.

I'd love for you to report success with this idea.

[Jac@stafford.net]

They may magnetize the whole shutter, but that may be no big deal, if the whole shutter is the same polarity, nothing, like shutter leaves would be attracted to each other. No sticking.

I don't think that's the way it works. If the shutter leaves become magnetized, they will attract each other (for the same reason they would not repel each other - they are unified in polarity.) Of course, there are some shutters that have nonmagnetic composite leaves, but they are few, and usually in large shutters

[Bob Salomon]

I don't think that's the way it works. If the shutter leaves become magnetized, they will attract each other (for the same reason they would not repel each other - they are unified in polarity.) Of course, there are some shutters that have nonmagnetic composite leaves, but they are few, and usually in large shutters

The linear motor shutters in the Rollei PQS lenses used carbon fiber blades. These shutters were made in 0 and 1 sizes and gave speeds up to 1/1000. The current Rodenstock shutter also has non metallic blades and is a 0 size.

[Jac@stafford.net]

The linear motor shutters in the Rollei PQS lenses used carbon fiber blades. These shutters were made in 0 and 1 sizes and gave speeds up to 1/1000. The current Rodenstock shutter also has non metallic blades and is a 0 size.

I had no idea! That's good to know.
.

[domaz]

Have you tested that your Graflex lensboard are magnetic? I thought they were stamped aluminum, meaning not magnetic.

[DrTang]

make a 2D to 4x4 adapter board - - buy a speed/crown to 4x4 adapter


presto change-o

[Jim Andrada]

I've made my own wooden adapter boards to do the same thing with my Seneca and other cameras. It isn't hard IF you have basic woodworking tools/skills (or a friend with such) and aren't concerned with making it a thing of beauty.

And I just took a board off of my Crown and checked it and it is indeed non-magnetic. You could of course always glue a couple of magnets to the Crown board or glue a steel insert onto the face of the board so the board would be sandwiched between the magnet and the insert.