Hi first off thanks for all your help.
my shutter is a copal No 1 is not the newest nor the oldes t about 20 years old if it would help I can post an Image of it came with a 210 Schnedier -Kreuznach Symmar1:5,6/210
Thanks
Hi first off thanks for all your help.
my shutter is a copal No 1 is not the newest nor the oldes t about 20 years old if it would help I can post an Image of it came with a 210 Schnedier -Kreuznach Symmar1:5,6/210
Thanks
Yes, Gustavo, it would help to post an image. If possible, a close-up of the PC terminal section of the shutter.
Hi I made a couple of images of the lense and they can be seen at
http://gcastilla.com/1035.jpg &
http://gcastilla.com/1033.jpg
By golly, you do have the type of Copal 1 shutter that uses two screws to fasten the PC connector onto the shutter. Jeff was correct. I have presently have five lenses, mounted in Copal 1 shutters, and none of them has the two -screw type of PC connector. If it is only missing, and was not broken off, you probably can get the replacement parts from RTS,Inc. Don't forget to also order the two retaining screws. Let's hope that the electrical connections inside of the shutter are still O.K. and the threads for the retaining screws are not stripped.
Do you have a link or phone number to RTS,Inc?
I gave it to you about seven entries above. Look upward (www.rtsphoto.com).
I do not know how to post a pic of this but I can e-mail you a small photo showing the right angle pc connector and the way it connects to the electrical contacts in the shutter. The pic shows the bottom of the pc connector, which is the same as the straight type.
Essentially, it just plugs in and gets screwed down.
Bookmarks