I want to process 6 sheets of 4x5 film in a Jobo Multitank 2 with a 2509 reel.
How much ml of liquid do i have to use? I do not use some kind of processor.
I want to process 6 sheets of 4x5 film in a Jobo Multitank 2 with a 2509 reel.
How much ml of liquid do i have to use? I do not use some kind of processor.
If you're talking about using it for inversion - why don't you put the reel in the tank, then measure the volume of water it takes to fill the tank?
If you're talking about using it on a roller base, I think 300mL is enough for 6 sheets.
If you're using the larger tank with two 6-sheet reels, 600mL is the ticket.
All the info is available online from Jobo's website (or Jobo-usa.com).
2520 (multitank 2) - rotation with 2509 - Minimum 270ml. You do not need a processor - just roll the tank back and forth on a smooth surface, or get a roller base.
Your developer dilution might call for a greater amount to be used per sqaure inch. of active material, this is true for every tank.
Inversion is not recommended, but most definitely possible - 1250ml needed.
2550 (multitank 5) - with 2X 2509 - 640ml minimum
1500 ml to fill it up...
Robert Oliver
Jobo Tank Capacities says 270mL for a 2523 tank with 2509 in it. You don't need a fancy processor, just a couple rollers to roll it on.
ex-Pic-A-Day (slowed after 2 years)
on flickr
Analogue Photo and Film FAQ (for APUG)
Open Source F/Stop Timer
thank you very much!
How do you get along with 6 sheets? Ive tried a couple of times but fail due to sheets sticking together.
Oh and thats using a rotary processor and the two small "baffles"
Søren Nielsen
Send from my Electronic Data Management Device using TWOFingerTexting
Some practice in the light and you will get it. You can always get the 2508 loader.
Bookmarks