I use the Lee lens hood/filter system. With my recently acquired Linhof Technika V 4x5 camera I've found that there isn't enough clearance between my lenses and the camera bed to permit the hood to be screwed onto the lens, i.e. the corners of the hood bump into the bed. I have to either use a lot of front rise to incr ease the clearance, or drop the bad and tilt the front standard backwards, or (i n the case of the 150 mm G Claron) both. This is something of a pain to say the least, particularly since I have to remember which lens requires which solution. I'm wondering whether anyone else uses the Lee system with this camera and has any suggestions or what other types of hoods/filter systems people use. Thanks. Brian
Bookmarks