So, I broke down and bought a JOBO 3005 to process 5x7 and 8x10. Question. Is how much developer to use with either film (5 sheets of 5x7 or 8x10). My go to developer is PMK Pyro. Just did some 8x10 FP4 and got real uneven development. I mixed 2500 ml and did a presoak first and 4 out of 5 were streaked badly. It seems to take quite a long time to even pour the stuff in and that concerned me from the get go. I know this should be a fairly fool proof system so figure it's my inexperience with this that's the problem. I used the BTZS tubes with no problems in the past. Any help will be appreciated.
Bookmarks