Hi there, Yes, the solution is to let the processor reach the desired temperature of 38 degrees while having the lid open and alarm beeping - It's a bit annoying but it works. Control your developer...
Type: Posts; User: vlad; Keyword(s):
Hi there, Yes, the solution is to let the processor reach the desired temperature of 38 degrees while having the lid open and alarm beeping - It's a bit annoying but it works. Control your developer...
Thank you very much for your input, Simon! I did many studio shots and none of them have issues like this. But almost all my field shots do have some sort of light leakege. I also painted inner parts...
Thank you very much, Jerry! You may be right about that! It's the new Intrepid wooden camera, and I just noticed the metal parts that hold the stnadards sometimes interfeere with edges of the frame...
Thank you very much, Vaughn! I'm indeed working with improvised lens board, but I checked it against the light. Seemed ok. Sunlight is much stronger though, so the problem may be that poor light...
Guys, thanks a lot! Great insight! I was thinking to reduce the ratio and do more extended development, but 9 minutes is indeed long enough time to smooth those initial 5 seconds. It must be a...
I'm new to 8x10 and realizing it is indeed a completely different game, even compare to 4x5!
Am I right to conclude this is caused by initial developer contact with the emulsion?
- I don't...
Hi folks,
I just received a new, updated price list from London's CPS. I know some folks here were looking for cheaper OXygen software deals or parts. Check it out!
iQsmart Lamp Assemblies,...
Hi Ben, that would be great indeed, thank you! Love your portrait work!
Many thanks for the answer, now, hopefully, there is someone who knows specifications of the probe?
I found a way to go around the faulty probe. You can follow my instructions:
My processor...
Hi, folks,
JOBO part #95444
I see similar water tank probes going for a couple of dollars (instead of $100.- they go officially for), and I was wondering if there is anybody here who tried...
Hi Guilherme, you mean to cover the scanner? The excessive light comes from the transparency light, not from outside. Due to the fact that the light tube is much wider than the frame you're working...
Thank you, Sergey! I'd never think it's a compatible file, and yet it is! Thanks again!
Hi Ari, thank you for your addition. It makes me a lot less shaky knowing there are people willing to help out, and sharing their experiences with these machines. I don't think there is all that many...
On how to solve the problem I encountered, I just received another opinion and suggestions from Michael Streeter. Excerpting his answer:
This issue may be related to:
A glitch at 4300 dpi. ...
Hello to you Sergey!
Thank you so much for your time replying to my recent post. It's indeed amazing chunk of crucial information you just shared!
I edited the post with necessary updates all...
Hi there Ari, I don't have the calibration sheet, so I can't perform the calibration itself. When the software was installed, instead of creating new calibration tables the settings were imported...
Hi there Jim.
The software will analyze the image and create its tonal margin which you shall adjust. Many times happens though, that the margin is limited, even after rescaling area for crop...
I got in touch with Michael, he is indeed super kind fellow, he even went through my settings via TeamViewer! Founding nothing unusual with my software we agreed that the occasion when parallel...
What I learned so far using the scanner for several weeks.
Scanner cons:
- The Oxygen software sucks, big time!
- I'm rather disappointed with the amount of digital noise the scanner...
Truth is that I never noticed any problems with negatives, only with slides.
Some of my films are terribly curved, FOMAs for example, or some old Efke or Agfa film that I still use. They need to be flattened. If there is a 1mm gap between the glass sheets because of the mask,...
Ari, you're too kind, thank you for your input! I imagine black mylar sheets would be too light for the job? I want to avoid tapping my negs on the glass, and just cover them with something along the...
Hi there guys, thank you kindly for the reply. I love the idea of having magnetic sheets on hand! I don't have any Newton ring problems so far, so I don't feel a need to elevate the film from the...
Hi folks,
I got me Creo Iqsmart scanner couple of weeks ago, but without any film masks. I'm looking at eBay to buy some black silicon rubber stripes that I believe should be useful enough for...
Thanks for the update guys, much appreciated!
Gentlemen, thank you very much for sharing your inputs. I'll try to reach Michael and come back to archive the answer.
Hi there Jim, thank you for replay.
I tried to reupload them screenshots.
So you're saying the preview window is active while the scanner is working, and you are able to do adjustments on all...
Hi folks,
Two weeks ago I got me the iQscan2 scanner with 2.6.3. version of the software. I'm having a hard time finding out how to set up my software preferences for faster workflow. I want to be...
Wonderful shot!
Thank you JP! I agree, would be nice indeed!
Thank you Renato, glad you like it!
I can't wait for this. I'm working with 4x5 for quite some time, always wanted to try 8x10 but never really felt like spending that crazy money these cameras usually go for. Plus the weight in indeed...
163745
Beautiful Norway - AeroEktar + Graflex Speed Graphic + Fuji NPS - FujiHunt in JOBO ATL 1500
Intrepid are about to run Kick-starter campaign for 8x10 camera if the budged is issue. They will be going for £450.- brand new, which is fantastic price!
Hi folks,
I'm investigating the problem I have with films lacking shadow detail even with fresh chemistry. I found out my JOBO is initiating process when first solution (developer) reaches 35°C...
Hello to you Thomas,
Thank you very much for your input. Problem I was opening this thread with is resolved thanks to koh303, unfortunately I encounter another issue with lift mechanism.
There...
Hi folks,
I'm having a problem with newly acquired Jobo atl 1000. The processor is connected to domestic water supply. After switching it on the pump does not bring water inside nor any of lights...
Got mine CPA-2 processor for €180 with 4541 and small 4312 tank in which I develop two 4x5 sheets at a time. I don't have no dedicated holders for sheet film but I gave it a try and it works perfect...
haha, Brian, that was fun to read! :))