Search:

I did color printing in the 1970s. I'm not color blind, but I don't 'see' in color. It did nothing for me, other than frustration because no contrast control like the Zone system I used in the 1970s.

Some amazing darkrooms people are posing!!

The flower in the OP looks fine, so, indeed the 'standard' lens is perfectly fine in that setting.

Now, if the OP wanted to make a 4x5 internegative or interpositive of that print, then I think...

You can get just about any magnification with just about any LF lens. A macro lens can image a flat field better; do you need that with those flowers?

The transformer in my EST2000N makes the usual hum I'd expect from a big transformer. It is about as loud as the hum from the lift motor which hums at rest because it is actively locked at rest.

I think it is clear there was an empiric observation the 180mm WS only fits a Seiko shutter. S = Seiko. See post #14.

No guess. Vaughan mentioned the "S" lens element only fits the Seiko and won't fit in the Copal.

I deleted a post above; I mistakenly showed a negative from a Fujinon 125mm SW.

Fixed.

The rear is tilted all the way back to its stop. This keeps the front rails out of the image.
The base tilt on the lens is tilted more than the back. This allows the lens to come all the way to the...

11x14 print from the 180mm.

249324

WS : S = Seiko. Great information in post #14.

With the center column down all the way, Karsh would be taking a picture of Churchill's knees...
249290

Agree, Vapla is the way to go.

My 360mm Componon mounts with a special flange. My 300mm Rodenstock uses it's flange as a retaining ring. Either way works.

249288

This was posted earlier today

Have not read of anyone building a copy camera on this forum. I was under the impression copy cameras were still free for hauling away.
...

Get a Shen-Hao, Chamonix, Toyo, Wista, Horseman or Interpid 4x5 and a Nikkor, Fujinon, Symmar or Sironar 150mm lens.

A center column!!! Heaven forbid!! Drew would not approve!

249229

Seems the Super Chromega heads are not that expensive on ebay. The power supply was pretty simple and could be reproduced rather easily, assuming the head does not come with the power supply.

I scanned my archives and I did not take many pictures of my CLS2000 when I was preparing it for use. Nothing that would help here.
248969
248970
248971
248972

I can't offer any useful information on the filters. I did not take my CLS2000 head apart that far. In fact the CLS2000 I got had never been taken apart before and was essentially untampered and in...

Nice, thanks for sharing.

This may not apply to still photography, but I understand some Kern Yvar Cine lenses were only coated on front and rear surfaces. Therefore, the internal surfaces could...

Do you have the manual? You can put a coin on the area of interest, then center the coin in the hole on the base of the focuser.

I think just the software cost more than ten lensboards. Assuming one send the file away for printing.
Maybe I'm mistaken. Which software is needed to make these?

I took my eye away from the viewfinder (where the eclipse was filling the frame) and, even though the sun looked tiny, the view was magnificent, Very eerie. I can't imagine not wanting to see it in...

Perspective ('compression') is only affected by subject distance. Film format or lens have no effect.
You are on the right track, cropping your 360mm images to see if you would like the 600.

Wow, that was fantastic. They should have that every spring.

Waiting for the sun to do some dry runs. Finally got some sun today.
Practice is needed. Lots of little unexpected things.
For example the lens is 1000mm equivalent focal length. The Bolex reflex...

You can easily get into really long exposure times with f-stop timing. For example if you need to increase a one-second exposure by 60 stops, your exposure will be longer than the estimated history...

The only measurement I usually do is on the ground glass. Like in post #2. Stops of exposure error are 2x the magnification of the image.
Another nice thing about the pritout in post #2 is that it...

I had a similar good experience getting replacement seals for my Watts Powers 440 Fotopanel a few years ago.

248382


248589

One can probably figure it out by looking at it (inside and out). Is it labeled in English?

I'm preparing to do movies of the event:

248304

Yes, at 24C, some developers 'not optimized for rotary' will have times less than 4 min.

Looks promising.

I got two 50 sheet boxes of Tmax-400 8x10 sometime around 2012 and finished it around 2015. As I recall the expiry was somewhere around 2009. The film worked very well with only minimal fogging and...

I wasn't sure if you had encountered the equation before, the 'thin lens equation'

http://hyperphysics.phy-astr.gsu.edu/hbase/geoopt/lenseq.html

1/p + 1/q = 1/f

That is very nice!!

I'm not sure about the current market for large format enlarger lenses. Quite a while back a got a set of silver, Durst branded, Componon lenses for less than $100 each. These went from 80mm to...