Finally getting around to learning contact printing now that the house renos are done…
First, I don’t have access to a room to set up as a darkroom, either permanent or temporary, so will be looking at a hydroponics grow tent. So, room will be a consideration.
It also means I will need a table top light source for exposure.
Given the cheap cost of old 35mm enlargers, especially if they have a crap lens, led me to consider it as a controllable (via stopping down/up) light source.
It will also be easy to set up/pack up.
I will need up to 7x17 and 11x14 which should be fine with 35mm base boards.
Thoughts?
Bookmarks