Use of X-ray film: technical discussion with example images

[Tin Can]

Thanks guys, I had almost given up on soft focus. Fortunately my model can sit very still as I slowly focus.

[diversey]

It is elegant! I wish I could do something like this.

11x14 Kodak X-Ray CSG 2 sided not stripped Rodinal 1/50 tray 4 minutes, Imagon 360 f7'7 holes open crop to 8x10 from scan on V700 cleaned up in PS

Second shot different from the one in Sept Portraits.

Discussion welcome

erin 2 XRay2x11x14crop by moe.randy, on Flickr

[bloodhoundbob]

11x14 Kodak X-Ray CSG 2 sided not stripped Rodinal 1/50 tray 4 minutes, Imagon 360 f7'7 holes open crop to 8x10 from scan on V700 cleaned up in PS

Second shot different from the one in Sept Portraits.

Discussion welcome

erin 2 XRay2x11x14crop by moe.randy, on Flickr

Outstanding, Randy! BTW my wife, who is a Black South African, told me to have you tell her how beautiful she is and that she loves her hair.

[Rory_5244]

Awesome portrait, Randy

[Tin Can]

Thanks everyone!

[Rick A]

MXR Blue xray film iso 50
B&J 5x7 Tailboard camera Wollensak 7 1/4
4 sec @ f16
dev Rodinal 1:100/9 min rotary
contact printed on Agfa MCP 310

[Andrew O'Neill]

Very nice work, Randy.

[senderoaburrido]

So after getting the approximate size of normal negatives from you guys, and buying a Dahle guillotine myself, my negatives are a bit better in shape. Still regularly off enough that it causes issues for the 2509n reel. Any tips for the actual procedure of cutting?

Specifically I keep having these little two to three millimeter slivers of extra stuff that need to get sliced off, and the Dahle chokes on little cuts like that. Mangles the negatives and creates irregular shape. Doesn't happen on every single one.

Even the ones that look and fit as it they were the right shape are without proper exposure borders when I develop them.

I've also been stacking up developed negatives. Looked at the prices to scan at the best of the two or three local labs here, and at 4$ per low-resolution scan, I might as well buy a dang scanner. Not really in my budget but there are no obvious alternatives. Funny because I've been keeping the most detailed photo-journal in my life, and I can't evaluate the results for cross comparison.

[seezee]

So after getting the approximate size of normal negatives from you guys, and buying a Dahle guillotine myself, my negatives are a bit better in shape. Still regularly off enough that it causes issues for the 2509n reel. Any tips for the actual procedure of cutting?

Specifically I keep having these little two to three millimeter slivers of extra stuff that need to get sliced off, and the Dahle chokes on little cuts like that. Mangles the negatives and creates irregular shape. Doesn't happen on every single one.

Even the ones that look and fit as it they were the right shape are without proper exposure borders when I develop them.

I've also been stacking up developed negatives. Looked at the prices to scan at the best of the two or three local labs here, and at 4$ per low-resolution scan, I might as well buy a dang scanner. Not really in my budget but there are no obvious alternatives. Funny because I've been keeping the most detailed photo-journal in my life, and I can't evaluate the results for cross comparison.

I'm not sure what's causing your problems with the cutter. There will always be a small 'waste' cut-off, due to the difference between nominal and actual dimensions for 4×5, but my Dahle cutter handles that with aplomb. Did you mark the cutter with e.g., Dyno tape, so you can accurately set the guide with reliable repeatability? Are you trying to cut more than 1 or 2 sheets at a time?

As to the scanner, I just bought a scanner after having paid for the cost of an Epson v850 in $5 + tax chunks, that being the price of a 2400 dpi scan with dust removal & output to TIFF at my local lab. So I feel your pain.

[Tin Can]

Very nice work, Randy.

You are kind Andrew and I am nearly impossible to satisfy.

IMHO it barely qualifies to post. But I am loosening up about that and I know I can improve if as I keep at it. I throw out or give away a lot of developed X-Ray film, fortunately I know an artist that wants scraps. She did a cool installation with 100's of MF slides. An out of reach room divider above a wall. All found slides. Back lit it works and has lasted 5 years now in a movie studio.