Hi folks,
I'm an JOBO CPE2-Plus user and considering to buy a JOBO lift #4072, not #4062.
I wonder whether I can attach lift #4072 to my CPE2.
If you have an information, please share your tip.
Thanks in advance.
Chan
Hi folks,
I'm an JOBO CPE2-Plus user and considering to buy a JOBO lift #4072, not #4062.
I wonder whether I can attach lift #4072 to my CPE2.
If you have an information, please share your tip.
Thanks in advance.
Chan
From the Jobo "new" site:
The JOBO Lift Accessory is an item you can add to your CPE-2 Plus (Lift #4062), CPA-2, or CPP-2 processors (Lift #4072 for either). It allows you to dump and fill the chemicals easier than doing it by hand. Also, when you use the Lift, the chemicals are introduced to the film in a more consistent manner which will help your processing run-to-run.
http://www.jobousadarkroom.com/products/lift.htm
Toyo 45 CF | Sinar P | Sinar F2
I think that the CPE and CPA/CPP lifts are not interchangeable. In other words, you need the 4062.
I guess you didn't like the answer I gave you to this question on the photo.net site. Alas, it looks like you got the same answer here.
Bookmarks