A device that might be of some help is the TriggerTrap: http://triggertrap.com/
A device that might be of some help is the TriggerTrap: http://triggertrap.com/
Since the original Graflite flashbulb holder was designed to work with lens board solenoids, why not use those items?
It seems to me all you would need to do is remotely trigger the lens board solenoid. The Graflite has at least one "H" female socket for remote triggering. So all one would need to add is a radio strobe synch set such as ones from PocketWizard or Paul Buff CyberSync. Add a flash cable from the receiver with an "H" male plug on the other end.
In my case I already own a Graflite flashbulb holder as well as a CyberSync kit and several PocketWizards. So it seems like all I will need to add is a cable to link a receiver to the Graflite.
Set the shutter to "T" and one pulse to open the shutter and a second to close it and you have your photo. True, there is no timer involved but I've found with long exposures on B&W film, close is good enough. A cell phone app or stopwatch can provide the duration, if needed.
The nice thing is a flashbulb can be added for fill, if needed. They are still made at a factory in Ireland by Meggaflash: http://www.meggaflash.com/
Question: do I have to worry about energy from the Graflite batteries going back to the radio receiver? If so, how do I isolate it? Or should I add a small relay between the receiver and the Graflite?
Graflite brochure on http://www.Graflex.org:
http://www.graflex.org/images/grafli...by-graflex.jpg
Last edited by AtlantaTerry; 29-Mar-2015 at 01:20. Reason: additional information
Thank you for your courteous reply, kind sir.
C.
Hmm, the tip of the air release, plus http://en.wikipedia.org/wiki/Lego_pneumatics then it's just a case of a servo and Bluetooth arduino could be the solution. - Now it's just figuring the control mechanism and components - could be do-able I reckon.
At the risk of beating the topic to death, there is a new-to-me Instructable here. Scroll down to readers' contributions for a latching-solenoid version.
A question regarding the Graflite flashbulb holder and shutter solenoid: there is a remote/slave plug on the unit. Is a slave sensitive enough to infrared to use ordinary IR remotes? (The solenoid is not a latching type which might be problematic for long exposures.)
Almost all you might want to know about Graflite flashes by Mr. Lommen here.
Bookmarks