The board size doesn't change, only the hole (shutter size) in the board. Look at your lenses - is the shutter marked "Copal 1," "Copal 0" or just "Copal"? If all else fails, measure the hole size after removing the lens/shutter from the board and compare it against standard Copal shutter hole sizes, i.e. 0 = 34.6mm, 1 = 41.6mm, 3 = 65mm
You will also need a lens spanner wrench, which are available from all sorts of places.
Unscrew the rear lens element first, then use the spanner wrench to remove the retaining ring.
![Click image for larger version.
Name: lens wrench.jpg
Views: 20
Size: 10.1 KB
ID: 129536](https://www.largeformatphotography.info/forum/attachment.php?attachmentid=129536&d=1424458335&thumb=1)
Bookmarks