Wollensak Verito 14 1/2" Diffused Focus Lens on 5x7 Camera?

[Leonard Robertson]

Hello,

does anyone know, if Verito 11.5 F4 fits to Rittreck 5x7 camera? I can´t find (google :-) ) its diameters

Thanks!

The 1922 Wollensak catalog here: http://www.cameraeccentric.com/info.html shows lens inner flange diameters, which may give you some idea of how it will fit your board. There may be more information in other Wollensak catalogs on cameraeccentric; I didn't look at many of them. I have no idea on the size of the 5X7 Rittreck lens board.

Len

[kdoco]

Thanks! It seems that it would be possible. Now only need Verito :-)

[djdister]

The Rittreck lens board is 114mm x 114mm and the 11.5 Verito about 92mm, so yes, a custom drilling could mount that lens. Also, the Rittreck 5x7 has a 15 inch max bellows extension, so you could focus that closer than infinity.

Hello,

does anyone know, if Verito 11.5 F4 fits to Rittreck 5x7 camera? I can´t find (google :-) ) its diameters

Thanks!

[kdoco]

Yes... the most important is the diameter of the hole on front of rittreck body. I hope i will havve chance to check it.

[djdister]

I measure the hole of the front standard of the Rittreck at 99mm, so it would just barely make it. You probably would not be able to use any lensboard adapter, as that would be even smaller in diameter, so using an actual Rittreck lens board or a custom made imitation would be necessary.

Yes... the most important is the diameter of the hole on front of rittreck body. I hope i will havve chance to check it.

[kdoco]

Yes, sounds perfect. That is no problem, i will have my imitation with requested paramters. Thanks again!