Here we go, the final outcome.


This is what the enlarger should look like, sat atop the mock-up...




The half completed box...




The lower box and the top platform aren't entirely parallel - I messed up, but everything else is fine. I used two bolts that sit inside the box (that originally bolt up the condenser stage to a bar) to hold the thing in place.

The inside needs spraying white, and the outside blue or grey


The final thing...




I don't have any shots with the lights off and the enlarger on just yet. I'll be doing that shortly!


I know of at least one light leak I need to sort (the bottom of the box onto the condenser stage). That should be fine though.