I had no idea why i found it, and tripod, laying on the floor. I had no idea why, or how, the side to side tilt, up and down tilt, and camera stud were all 4 or 5 turns loose.

the only damage i can SEE is that the ground glass has a few tiny chips on it. And that after measuring, the front and rear standards are no longer parallel with each other.

omega view 45d. The rear standard, the left side with the bubble level, is about 1/8" farther from the front standard than the other side.

Camera has always been left in "neutral"using the handy dandy detents in the stampings.. Should i be concerned,