Quote Originally Posted by photo8x10 View Post
I have this scanner for about 3 years and today after one year of stop, it isn't turn on. No led or other thing is on...
I don't understand why it is not work... the last time I use works properly and today after a 1 year period of inattivity doesn't work.
I would like to know is in case there is a fuse, or sometimes other things to check to make it live again?
Thanks
Stefano
Hi Stefano . . .
If the machine is completely dead, i.e. no LED's at all, then probably it is a power supply failure.
It is situated at the left hand side . . . Remove the tray protection to get access to the side cover near the on/off switch.
A replacement power supply may only be available via SCREEN . . (If you are lucky . . ) or via someone with a spare/scrap machine.

If the power supply is OK . . and the machine is an FT-S5500 . . Then I have a spare 'SCONT' board . . . (Only fits the 5500 type machine . . !!)
Hope you can work it out.
TC542