I have a few questions about PyroCat HD Adjacency Effect & Minimal Agitation for those who use this process.

I know Steve Sherman is extremely knowledgeable on this subject and has produced a premium video which I am contemplating buying although my process is scanning and not darkroom printing.

According to an article I have been reading on the unblinkingeye website ..

Minimal Agitation — Minimal agitation consists of continuous agitation for the first 60 seconds of development, followed by 10 seconds of agitation every third minute. With this method a pre -soak of five minutes is strongly recommended to avoid the possible formation of bubbles on the emulsion. Minimal agitation has three desirable results: 1) it gives great apparent sharpness through the formation of maximum adjacency effects, 2) it provides a compensating effect, and 3) it provides increased emulsion speed.
When using this method with tank development especially when trying to achieve maximum adjacency effects do you still use a dilution of 1:1:100 or do you have to dilute the solution further.