Graflex Back Confusion

[Fotoguy20d]

I have a 4x5 Super D with a back that I can't figure out. It's a cross between a spring back or graflok and a Graflex back, I suppose. It takes graphic grafmatics and roll film holders, not Graflex ones. But, it lacks graflok hooks, and requires slotted holders. It has adjustable rails both top and bottom instead of a fixed rail like a Graflex back on the bottom. So, what is it?

Thanks,
Dan

[RawheaD]

There are these things called "photos" that you can upload to forums like this that tend to help in these situations. Have you heard of it?

[MMELVIS]

Is your camera back like this one http://www.graflex.org/articles/series-d/

[Fotoguy20d]

I'll try to get some photos tomorrow. It's an odd thing. I'm starting to wonder if it isn't either a homemade mod or maybe a factory special. The camera dates from 1947 so its not a graflok (since they didn't start making these with graflok until the mid 50s). It looks like the graflex backs, but, the light trap is the single groove of a spring/graflok back. A graflex gramatic or roll film holder won't fit - its too wide. A graphic film holder (roll or grafmatic) drops right in. As does a Polaroid 405, but the sliders wont go over the edges, they're too tall.

Dan

[Fotoguy20d]

Here's what this back looks like. Anyone have any thoughts as to what this is? Note that the grafmatic is a graphic model, not a graflex. More photos on Flickr

Thanks,
Dan


P1010095 by Fotoguy20d, on Flickr


P1010098 by Fotoguy20d, on Flickr

[jnantz]

hi dan

its a graflex back

http://www.graflex.org/helpboard/vie...eb31f76d333f83

the pre-curser to the graflok back ...

have fun !
john

[Dan Fromm]

Dan, two sliders on inclined ramps and the groove to the right of the gate make it a Graflok. Absence of the pins to hold a Graflok focusing panel makes it a heterodox Graflok, quite possibly homebrew. I could well be mistaken, but I don't think the gate should be surrounded by painted wood. I don't have a Super D, have an RB Ser. B with Graflex back and its back is painted brass sheet.

Ask on www.graflex.org

Cheers,

Dan

[Miguel Coquis]

...grafloc 4x5" camera back will do !